Thanks for the quick response. So I'm playing around with it and getting different error messages.With your instructions I found -- C:\local\boost_1_58_0\lib32-msvc-12.0 countains the boost compiled libraries -- libboost_system-vc120-mt-1_58.lib ...So am I then passing that directory into the command like so:>msbuild /p:AdditionalLibPaths="%myboost\lib32-msvc-12.0" /p:Configuration=Release /p:Platform=Win32 C:\QuantLib-1.6\QuantLib_vc12.sln -o "quantlib.txt"or>msbuild /p:AdditionalLibPaths="C:\local\boost_1_58_0\lib32-msvc-12.0" /p:Configuration=Release /p:Platform=Win32 C:\QuantLib-1.6\QuantLib_vc12.sln -o "quantlib.txt"both give me an output :Microsoft (R) Build Engine version 4.6.1055.0[Microsoft .NET Framework, version 4.0.30319.42000]Copyright (C) Microsoft Corporation. All rights reserved.MSBUILD : error MSB1001: Unknown switch.Switch: -oFor switch syntax, type "MSBuild /help"Best,JakeOn Tue, Nov 22, 2016 at 12:32 PM Andres Hernandez <[hidden email]> wrote:Hi Jake,you are right, you need to provide it with the correct directory where the boost compiled libraries are per step 3. For example I have them under the boost directory under stage\lib (C:\boost\boost_1_61_0\stage\lib). If you don't know where they are you might look for libboost_system-vc120*cheers,AndresOn Tue, Nov 22, 2016 at 6:58 PM, Jake Larrimore <[hidden email]> wrote:Hi everyone,I'm trying to get QuantLib installed on a Windows 7 machine. Specifically I'm following these instrucitons:However when I run step 7:>msbuild /p:AdditionalLibPaths="%myboost\lib32-msvc-12.0" /p:Configuration=Release /p:Platform=Win32 C:\QuantLib-1.6\QuantLib_vc12.slnI'm getting a slew of Errors. It seems I don't have things in the right locations or the install can't find them.QuantLib Location: C:\QuantLib-1.6QuantLib SWIG location: C:\QuantLib-SWIG-1.9Boost Location: C:\boost***Note: myboost\lib32-msvc-12.0 I can't find that lib32-msvc-12.0 anywhere, could that be the problem?I'm sorry I don't have much VS C++ experience, so these errors are not as verbose as I'd need to debug it.Any help would be greatly appreciated.Output:Confirm that the path in the <Import> declaration is correct, and that the fileexists on disk.Done Building Project "C:\QuantLib-1.6\Examples\ConvertibleBonds\ConvertibleBonds.vcxproj" (default targets) -- FAILED.Project "C:\QuantLib-1.6\QuantLib_vc12.sln" (1) is building "C:\QuantLib-1.6\Examples\FRA\FRA.vcxproj" (7) on node 1 (default targets).C:\QuantLib-1.6\Examples\FRA\FRA.vcxproj(42,3): error MSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found. Confirm that the path in the <Import> declaration is correct, and that the file exists on disk.Done Building Project "C:\QuantLib-1.6\Examples\FRA\FRA.vcxproj" (default targets) -- FAILED.Project "C:\QuantLib-1.6\QuantLib_vc12.sln" (1) is building "C:\QuantLib-1.6\Examples\Repo\Repo.vcxproj" (8) on node 1 (default targets).C:\QuantLib-1.6\Examples\Repo\Repo.vcxproj(42,3): error MSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found. Confirm that the path inthe <Import> declaration is correct, and that the file exists on disk.Done Building Project "C:\QuantLib-1.6\Examples\Repo\Repo.vcxproj" (default targets) -- FAILED.Project "C:\QuantLib-1.6\QuantLib_vc12.sln" (1) is building "C:\QuantLib-1.6\Examples\Replication\Replication.vcxproj" (9) on node 1 (default targets).C:\QuantLib-1.6\Examples\Replication\Replication.vcxproj(42,3): error MSB4019:The imported project "C:\Microsoft.Cpp.Default.props" was not found. Confirm that the path in the <Import> declaration is correct, and that the file exists ondisk.Done Building Project "C:\QuantLib-1.6\Examples\Replication\Replication.vcxproj" (default targets) -- FAILED.Project "C:\QuantLib-1.6\QuantLib_vc12.sln" (1) is building "C:\QuantLib-1.6\Examples\BermudanSwaption\BermudanSwaption.vcxproj" (10) on node 1 (default targets).C:\QuantLib-1.6\Examples\BermudanSwaption\BermudanSwaption.vcxproj(42,3): errorMSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found.Confirm that the path in the <Import> declaration is correct, and that the fileexists on disk.Done Building Project "C:\QuantLib-1.6\Examples\BermudanSwaption\BermudanSwaption.vcxproj" (default targets) -- FAILED.Project "C:\QuantLib-1.6\QuantLib_vc12.sln" (1) is building "C:\QuantLib-1.6\Examples\DiscreteHedging\DiscreteHedging.vcxproj" (11) on node 1 (default targets).C:\QuantLib-1.6\Examples\DiscreteHedging\DiscreteHedging.vcxproj(42,3): error MSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found. Confirm that the path in the <Import> declaration is correct, and that the file exists on disk.Done Building Project "C:\QuantLib-1.6\Examples\DiscreteHedging\DiscreteHedging.vcxproj" (default targets) -- FAILED.Project "C:\QuantLib-1.6\QuantLib_vc12.sln" (1) is building "C:\QuantLib-1.6\Examples\FittedBondCurve\FittedBondCurve.vcxproj" (12) on node 1 (default targets).C:\QuantLib-1.6\Examples\FittedBondCurve\FittedBondCurve.vcxproj(42,3): error MSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found. Confirm that the path in the <Import> declaration is correct, and that the file exists on disk.Done Building Project "C:\QuantLib-1.6\Examples\FittedBondCurve\FittedBondCurve.vcxproj" (default targets) -- FAILED.Project "C:\QuantLib-1.6\QuantLib_vc12.sln" (1) is building "C:\QuantLib-1.6\Examples\CallableBonds\CallableBonds.vcxproj" (13) on node 1 (default targets).C:\QuantLib-1.6\Examples\CallableBonds\CallableBonds.vcxproj(42,3): error MSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found. Confirm that the path in the <Import> declaration is correct, and that the file exists on disk.Done Building Project "C:\QuantLib-1.6\Examples\CallableBonds\CallableBonds.vcxproj" (default targets) -- FAILED.Project "C:\QuantLib-1.6\QuantLib_vc12.sln" (1) is building "C:\QuantLib-1.6\Examples\CDS\CDS.vcxproj" (14) on node 1 (default targets).C:\QuantLib-1.6\Examples\CDS\CDS.vcxproj(42,3): error MSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found. Confirm that the path in the <Import> declaration is correct, and that the file exists on disk.Done Building Project "C:\QuantLib-1.6\Examples\CDS\CDS.vcxproj" (default targets) -- FAILED.Project "C:\QuantLib-1.6\QuantLib_vc12.sln" (1) is building "C:\QuantLib-1.6\Examples\Bonds\Bonds.vcxproj" (15) on node 1 (default targets).C:\QuantLib-1.6\Examples\Bonds\Bonds.vcxproj(42,3): error MSB4019: The importedproject "C:\Microsoft.Cpp.Default.props" was not found. Confirm that the pathin the <Import> declaration is correct, and that the file exists on disk.Done Building Project "C:\QuantLib-1.6\Examples\Bonds\Bonds.vcxproj" (default targets) -- FAILED.Project "C:\QuantLib-1.6\QuantLib_vc12.sln" (1) is building "C:\QuantLib-1.6\Examples\MarketModels\MarketModels.vcxproj" (16) on node 1 (default targets).C:\QuantLib-1.6\Examples\MarketModels\MarketModels.vcxproj(42,3): error MSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found. Confirmthat the path in the <Import> declaration is correct, and that the file existson disk.Done Building Project "C:\QuantLib-1.6\Examples\MarketModels\MarketModels.vcxproj" (default targets) -- FAILED.Project "C:\QuantLib-1.6\QuantLib_vc12.sln" (1) is building "C:\QuantLib-1.6\Examples\Gaussian1dModels\Gaussian1dModels.vcxproj" (17) on node 1 (default targets).C:\QuantLib-1.6\Examples\Gaussian1dModels\Gaussian1dModels.vcxproj(42,3): errorMSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found.Confirm that the path in the <Import> declaration is correct, and that the fileexists on disk.Done Building Project "C:\QuantLib-1.6\Examples\Gaussian1dModels\Gaussian1dModels.vcxproj" (default targets) -- FAILED.Project "C:\QuantLib-1.6\QuantLib_vc12.sln" (1) is building "C:\QuantLib-1.6\Examples\MultidimIntegral\MultidimIntegral.vcxproj" (18) on node 1 (default targets).C:\QuantLib-1.6\Examples\MultidimIntegral\MultidimIntegral.vcxproj(42,3): errorMSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found.Confirm that the path in the <Import> declaration is correct, and that the fileexists on disk.Done Building Project "C:\QuantLib-1.6\Examples\MultidimIntegral\MultidimIntegral.vcxproj" (default targets) -- FAILED.Project "C:\QuantLib-1.6\QuantLib_vc12.sln" (1) is building "C:\QuantLib-1.6\Examples\LatentModel\LatentModel.vcxproj" (19) on node 1 (default targets).C:\QuantLib-1.6\Examples\LatentModel\LatentModel.vcxproj(42,3): error MSB4019:The imported project "C:\Microsoft.Cpp.Default.props" was not found. Confirm that the path in the <Import> declaration is correct, and that the file exists ondisk.Done Building Project "C:\QuantLib-1.6\Examples\LatentModel\LatentModel.vcxproj" (default targets) -- FAILED.Project "C:\QuantLib-1.6\QuantLib_vc12.sln" (1) is building "C:\QuantLib-1.6\Examples\BasketLosses\BasketLosses.vcxproj" (20) on node 1 (default targets).C:\QuantLib-1.6\Examples\BasketLosses\BasketLosses.vcxproj(41,3): error MSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found. Confirmthat the path in the <Import> declaration is correct, and that the file existson disk.Done Building Project "C:\QuantLib-1.6\Examples\BasketLosses\BasketLosses.vcxproj" (default targets) -- FAILED.Done Building Project "C:\QuantLib-1.6\QuantLib_vc12.sln" (default targets) --FAILED.Build FAILED."C:\QuantLib-1.6\QuantLib_vc12.sln" (default target) (1) ->"C:\QuantLib-1.6\QuantLib.vcxproj" (default target) (2) ->C:\QuantLib-1.6\QuantLib.vcxproj(42,3): error MSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found. Confirm that the path in the <Import> declaration is correct, and that the file exists on disk."C:\QuantLib-1.6\QuantLib_vc12.sln" (default target) (1) ->"C:\QuantLib-1.6\test-suite\testsuite.vcxproj" (default target) (3) ->C:\QuantLib-1.6\test-suite\testsuite.vcxproj(43,3): error MSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found. Confirm that the path in the <Import> declaration is correct, and that the file exists on disk."C:\QuantLib-1.6\QuantLib_vc12.sln" (default target) (1) ->"C:\QuantLib-1.6\Examples\Swap\Swap.vcxproj" (default target) (4) ->C:\QuantLib-1.6\Examples\Swap\Swap.vcxproj(42,3): error MSB4019: The importedproject "C:\Microsoft.Cpp.Default.props" was not found. Confirm that the pathin the <Import> declaration is correct, and that the file exists on disk."C:\QuantLib-1.6\QuantLib_vc12.sln" (default target) (1) ->"C:\QuantLib-1.6\Examples\EquityOption\EquityOption.vcxproj" (default target) (5) ->C:\QuantLib-1.6\Examples\EquityOption\EquityOption.vcxproj(42,3): error MSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found. Confirm that the path in the <Import> declaration is correct, and that the file exists on disk."C:\QuantLib-1.6\QuantLib_vc12.sln" (default target) (1) ->"C:\QuantLib-1.6\Examples\ConvertibleBonds\ConvertibleBonds.vcxproj" (default target) (6) ->C:\QuantLib-1.6\Examples\ConvertibleBonds\ConvertibleBonds.vcxproj(42,3): error MSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found. Confirm that the path in the <Import> declaration is correct, and that the file exists on disk."C:\QuantLib-1.6\QuantLib_vc12.sln" (default target) (1) ->"C:\QuantLib-1.6\Examples\FRA\FRA.vcxproj" (default target) (7) ->C:\QuantLib-1.6\Examples\FRA\FRA.vcxproj(42,3): error MSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found. Confirm that the path inthe <Import> declaration is correct, and that the file exists on disk."C:\QuantLib-1.6\QuantLib_vc12.sln" (default target) (1) ->"C:\QuantLib-1.6\Examples\Repo\Repo.vcxproj" (default target) (8) ->C:\QuantLib-1.6\Examples\Repo\Repo.vcxproj(42,3): error MSB4019: The importedproject "C:\Microsoft.Cpp.Default.props" was not found. Confirm that the pathin the <Import> declaration is correct, and that the file exists on disk."C:\QuantLib-1.6\QuantLib_vc12.sln" (default target) (1) ->"C:\QuantLib-1.6\Examples\Replication\Replication.vcxproj" (default target) (9)->C:\QuantLib-1.6\Examples\Replication\Replication.vcxproj(42,3): error MSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found. Confirmthat the path in the <Import> declaration is correct, and that the file existson disk."C:\QuantLib-1.6\QuantLib_vc12.sln" (default target) (1) ->"C:\QuantLib-1.6\Examples\BermudanSwaption\BermudanSwaption.vcxproj" (default target) (10) ->C:\QuantLib-1.6\Examples\BermudanSwaption\BermudanSwaption.vcxproj(42,3): error MSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found. Confirm that the path in the <Import> declaration is correct, and that the file exists on disk."C:\QuantLib-1.6\QuantLib_vc12.sln" (default target) (1) ->"C:\QuantLib-1.6\Examples\DiscreteHedging\DiscreteHedging.vcxproj" (default target) (11) ->C:\QuantLib-1.6\Examples\DiscreteHedging\DiscreteHedging.vcxproj(42,3): errorMSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found.Confirm that the path in the <Import> declaration is correct, and that the fileexists on disk."C:\QuantLib-1.6\QuantLib_vc12.sln" (default target) (1) ->"C:\QuantLib-1.6\Examples\FittedBondCurve\FittedBondCurve.vcxproj" (default target) (12) ->C:\QuantLib-1.6\Examples\FittedBondCurve\FittedBondCurve.vcxproj(42,3): errorMSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found.Confirm that the path in the <Import> declaration is correct, and that the fileexists on disk."C:\QuantLib-1.6\QuantLib_vc12.sln" (default target) (1) ->"C:\QuantLib-1.6\Examples\CallableBonds\CallableBonds.vcxproj" (default target)(13) ->C:\QuantLib-1.6\Examples\CallableBonds\CallableBonds.vcxproj(42,3): error MSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found. Confirm that the path in the <Import> declaration is correct, and that the file exists on disk."C:\QuantLib-1.6\QuantLib_vc12.sln" (default target) (1) ->"C:\QuantLib-1.6\Examples\CDS\CDS.vcxproj" (default target) (14) ->C:\QuantLib-1.6\Examples\CDS\CDS.vcxproj(42,3): error MSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found. Confirm that the path inthe <Import> declaration is correct, and that the file exists on disk."C:\QuantLib-1.6\QuantLib_vc12.sln" (default target) (1) ->"C:\QuantLib-1.6\Examples\Bonds\Bonds.vcxproj" (default target) (15) ->C:\QuantLib-1.6\Examples\Bonds\Bonds.vcxproj(42,3): error MSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found. Confirm that the path in the <Import> declaration is correct, and that the file exists on disk."C:\QuantLib-1.6\QuantLib_vc12.sln" (default target) (1) ->"C:\QuantLib-1.6\Examples\MarketModels\MarketModels.vcxproj" (default target) (16) ->C:\QuantLib-1.6\Examples\MarketModels\MarketModels.vcxproj(42,3): error MSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found. Confirm that the path in the <Import> declaration is correct, and that the file exists on disk."C:\QuantLib-1.6\QuantLib_vc12.sln" (default target) (1) ->"C:\QuantLib-1.6\Examples\Gaussian1dModels\Gaussian1dModels.vcxproj" (default target) (17) ->C:\QuantLib-1.6\Examples\Gaussian1dModels\Gaussian1dModels.vcxproj(42,3): error MSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found. Confirm that the path in the <Import> declaration is correct, and that the file exists on disk."C:\QuantLib-1.6\QuantLib_vc12.sln" (default target) (1) ->"C:\QuantLib-1.6\Examples\MultidimIntegral\MultidimIntegral.vcxproj" (default target) (18) ->C:\QuantLib-1.6\Examples\MultidimIntegral\MultidimIntegral.vcxproj(42,3): error MSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found. Confirm that the path in the <Import> declaration is correct, and that the file exists on disk."C:\QuantLib-1.6\QuantLib_vc12.sln" (default target) (1) ->"C:\QuantLib-1.6\Examples\LatentModel\LatentModel.vcxproj" (default target) (19) ->C:\QuantLib-1.6\Examples\LatentModel\LatentModel.vcxproj(42,3): error MSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found. Confirmthat the path in the <Import> declaration is correct, and that the file existson disk."C:\QuantLib-1.6\QuantLib_vc12.sln" (default target) (1) ->"C:\QuantLib-1.6\Examples\BasketLosses\BasketLosses.vcxproj" (default target) (20) ->C:\QuantLib-1.6\Examples\BasketLosses\BasketLosses.vcxproj(41,3): error MSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found. Confirm that the path in the <Import> declaration is correct, and that the file exists on disk.0 Warning(s)19 Error(s)Time Elapsed 00:00:00.18--Jake Larrimore<a href="tel:443-340-9570" value="+14433409570" class="gmail_msg" target="_blank">443-340-9570------------------------------------------------------------------------------
_______________________________________________
QuantLib-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/quantlib-users
--Jake Larrimore<a href="tel:(443)%20340-9570" value="+14433409570" class="gmail_msg" target="_blank">443-340-9570
Free forum by Nabble | Disable Popup Ads | Edit this page |