http://quantlib.414.s1.nabble.com/LibreOffice-Calc-addin-tp18009p18092.html
Enums are not generated automatically. They have to be defined in
conversions. For further discussions please provide the metadata code
you generated. Without it I cannot assist you ...
evaluationdate is set to Today(). So calculations might change from day
the calendar (holidays) is different from NullCalendar ...). If you
choice in "Settings". Then everything should work as you expect.
> Hello Lars, thank you for the reply.
> Somehow the Position enum wasnt being generated in the sources and I
> realized it has to be declared in a separate file; is this intended?
>
> Theres some chaotic behaviour, like default TS calibrating to
> different values to the previous time I openend the worksheet but I
> dont know if this is a serialization or a Calc problem. Looks like
> resetting the eval date cleans up things. I'll try to get an specific
> user case.
>
> I just sent a pr
> Best
> pp
>
>
> ----- Original Message -----
> >
> > Hi,
> >
> > some comments below.
> >
> >
> > Best regards,
> > Lars
> >
> >
> >
> > Am Dienstag, den 14.02.2017, 11:31 +0100 schrieb
[hidden email]:
> > >
> > > Hi,
> > > I did realize I dont need abstract base classes. I had declared
> > > RiskyFixedBond and therefore I needed to have currencies, that
> > > went
> > > all right. Also I am declaring CDS but I get problems with the
> > > type
> > > conversion of the protection side and the schedule type (also in
> > > the
> > > defaultable bond). If I understood your doc I wrote:
> > >
> > > ImplicitConversionsCalc = [
> > > ("QuantLib::Protection::Side", "std::string", "string",
> > > "EnumeratedType", "<<"),
> > > ]
> > >
> > > QuantLibTypes = [
> > > ("EnumeratedType", "ql/default.hpp",
> > > "QuantLib::Protection::Side", "std::string", "Buyer",
> > > "QuantLib::Protection::Buyer"),
> > > ("EnumeratedType", "ql/default.hpp",
> > > "QuantLib::Protection::Side", "std::string", "Seller",
> > > "QuantLib::Protection::Seller"),
> > > ]
> > >
> > ###
> > That declaration should work (analoguous to Option::Type). The
> > parameter type in the addin interface should be
> > QuantLib::Protection::Side.
> > ###
> > >
> > > is that ok? For the scehdule I will pull your code and figure it
> > > out.
> > >
> > > Also I have moved the code under "./gensrc/code" to
> > > "./gensrc/codesrc" the reason is that if I want to debug the
> > > python
> > > tools with eclipse or any other debugger it gets confused with
> > > /code/
> > > and the python libraries.
> > ###
> > I will change it ...
> > ###
> > >
> > > Antoher minor point is that the parser is very picky on not
> > > having
> > > carriage returns on the parameter list of constructors, it fails
> > > if
> > > theres one.
> > ###
> > The *.py files under the metadata directory are parsed in python
> > syntax. It should be possible to use a backslash at the end of a
> > line
> > for a line break like
> >
> > ("Constructor", "ql/experimental/credit/riskybond.hpp",
> > "QuantLib::RiskyFixedBond(std::string Name,
> > QuantLib::Currency
> > Ccy, \
> > QuantLib::Real RecoveryRate,
> > QuantLib::Handle<QuantLib::DefaultProbabilityTermStructure>
> > DefaultTS,
> > \
> > QuantLib::Schedule Schedule, QuantLib::Real Rate,
> > QuantLib::DayCounter DayCounter, \
> > QuantLib::BusinessDayConvention PaymentConvention,
> > std::vector<QuantLib::Real> Notionals, \
> > QuantLib::Handle<QuantLib::YieldTermStructure> YieldTS)",
> > "", "qlRiskyFixedBond"),
> > ###
> > >
> > > Best regards
> > > pp
> > >
> > >
> > >
> > >
> > > ----- Original Message -----
> > > >
> > > >
> > > > Hello,
> > > >
> > > > I have added an example under experimental/credit/riskybond.py
> > > > and
> > > > in
> > > > the spreadsheet.
> > > >
> > > > You need not define the base class - except you would like to
> > > > refer
> > > > to
> > > > member functions of it. I assume that it is not necessary to
> > > > instantiate a base class (like RiskyBond which has virtual
> > > > functions).
> > > >
> > > > I also added code to handle 1D return types of
> > > > enumeratedobjects
> > > > (ccy()
> > > > function of RiskyBond) in calc.py and for the correct handling
> > > > of
> > > > std::string input parameters (like 'name' of riskybond - not
> > > > handled
> > > > like objects) in addinclasses.py.
> > > >
> > > > In some part of the code I have left statements of the type
> > > > --- if __name__ == "__main__": ---. You can ignore them since
> > > > you
> > > > invoke 'python main.py -o'. The previous statement --- if
> > > > __name__
> > > > ...
> > > > --- is for debugging since I can execute the file alone without
> > > > executing main.py.
> > > >
> > > >
> > > > Regards,
> > > > Lars Callenbach
> > > >
> > > >
> > > >
> > > >
> > > > Am Montag, den 13.02.2017, 14:20 +0100 schrieb
[hidden email]:
> > > > >
> > > > >
> > > > > Hi again,
> > > > > I am not sure what I was asking makes sense anymore;
> > > > > something
> > > > > is
> > > > > failing when I add some extra functions but not sure where.
> > > > > Some add ok some do not, so it might just be syntax staring
> > > > > in
> > > > > front
> > > > > of my nose.
> > > > >
> > > > > I am looking at the code and some files contain non portable
> > > > > paths
> > > > > like line 275 of enumeratedobjects.py :
> > > > > pmd = ParseMetaData('/work/QuantLib-
> > > > > Addin/gensrc/metadata',
> > > > > 'Calc')
> > > > > this does not prevent things from working on my side however.
> > > > > guess it is not being used?
> > > > >
> > > > > Best
> > > > > PP
> > > > >
> > > > >
> > > > > ----- Original Message -----
> > > > > >
> > > > > >
> > > > > >
> > > > > > Hi Lars,
> > > > > > How do you declare and use abstract types? Say I want to
> > > > > > define
> > > > > > a
> > > > > > new
> > > > > > constructor (e.g. riskybond.py) which needs an pointer in
> > > > > > its
> > > > > > constructor of a virtual base type (defaulttermstructure)
> > > > > > How
> > > > > > do
> > > > > > I
> > > > > > declare that type? I see there are methods for the type
> > > > > > (defaulttermstructure.py) so they can be used from all
> > > > > > derived
> > > > > > classes but how does one declares the abstract type to be
> > > > > > recognised?
> > > > > > Best
> > > > > > pp
> > > > > >
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Hi,
> > > > > > > I like its simplicity. It works very well on my
> > > > > > > mint/ubuntu
> > > > > > > with
> > > > > > > the
> > > > > > > last version of libreoffice + sdk. I can drive the
> > > > > > > debugger
> > > > > > > directly
> > > > > > > from Calc.
> > > > > > > Too bad the worksheets need to be rewritten but that's a
> > > > > > > minor
> > > > > > > inconvenience.
> > > > > > > Something I am wondering, what happens now with the
> > > > > > > dependencies?
> > > > > > > Can
> > > > > > > they be forced now?
> > > > > > > Would it be possible to get the doxygen c++ doc for free
> > > > > > > into
> > > > > > > the
> > > > > > > parameters of the functions? Through an hypothetical
> > > > > > > doxy-c++-py
> > > > > > > module?
> > > > > > > I might pr new functions as I use them.
> > > > > > > Best and thank you
> > > > > > > pp
> > > > > > >
> > > > > > > ----- Original Message -----
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Hi,
> > > > > > > >
> > > > > > > > it is independent of Reposit and has a modified version
> > > > > > > > of
> > > > > > > > the
> > > > > > > > "old"
> > > > > > > > repository/objecthandler code of the QuantLibAddin in
> > > > > > > > the
> > > > > > > > folder
> > > > > > > > oh.
> > > > > > > >
> > > > > > > > The other code components are generated by python code
> > > > > > > > based
> > > > > > > > on
> > > > > > > > metadata defined under gensrc/metadata (similar to SWIG
> > > > > > > > but
> > > > > > > > without
> > > > > > > > the
> > > > > > > > class hierarchy redefinitions).
> > > > > > > >
> > > > > > > > I assume that Mac-OS is a quick win - but I have had
> > > > > > > > some
> > > > > > > > problems
> > > > > > > > compiling the examples of LibreOffice/SDK under Windows
> > > > > > > > (unix
> > > > > > > > convention of paths in the SDK files which do not work
> > > > > > > > under
> > > > > > > > Windows
> > > > > > > > -
> > > > > > > > help appreciated since my license of VS-C++ is
> > > > > > > > expired).
> > > > > > > >
> > > > > > > >
> > > > > > > > Kind regards,
> > > > > > > > Lars
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Am Donnerstag, den 26.01.2017, 18:50 +0100 schrieb
> > > > > > > >
[hidden email]:
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > That's very good news,
> > > > > > > > > I know I could look and I will but, is that working
> > > > > > > > > ok
> > > > > > > > > for
> > > > > > > > > all
> > > > > > > > > OS?
> > > > > > > > > Is
> > > > > > > > > it based on the previous OH or on the new Reposit
> > > > > > > > > framework?
> > > > > > > > > Thank you
> > > > > > > > > pp
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > ----- Original Message -----
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Good evening,
> > > > > > > > > >
> > > > > > > > > > I have a running version for the addin for
> > > > > > > > > > LibreOffice/Calc.
> > > > > > > > > > On
> > > > > > > > > > GitHub
> > > > > > > > > > I have a first prototype for automatic addin code
> > > > > > > > > > generation
> > > > > > > > > > of
> > > > > > > > > > QuantLib functions and classes for Calc
> > > > > > > > > > (github.com/lcallenbach/quantlibaddin).
> > > > > > > > > >
> > > > > > > > > > Feedback (and testing on other platforms) welcome.
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Kind regards,
> > > > > > > > > > Lars
> > > > > > > > > >
> > > > > > > > > > -------------------------------------------------
> > > > > > > > > > ----
> > > > > > > > > > ----
> > > > > > > > > > --------
> > > > > > > > > > -------------
> > > > > > > > > > Check out the vibrant tech community on one of the
> > > > > > > > > > world's
> > > > > > > > > > most
> > > > > > > > > > engaging tech sites, SlashDot.org!
> > > > > > > > > >
http://sdm.link/slashdot> > > > > > > > > > _______________________________________________
> > > > > > > > > > QuantLib-dev mailing list
> > > > > > > > > >
[hidden email]
> > > > > > > > > >
https://lists.sourceforge.net/lists/listinfo/quantl> > > > > > > > > > ib-d
> > > > > > > > > > ev
> > > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > > -------------------------------------------------------
> > > > > > > ----
> > > > > > > ----
> > > > > > > ---------------
> > > > > > > Check out the vibrant tech community on one of the
> > > > > > > world's
> > > > > > > most
> > > > > > > engaging tech sites, SlashDot.org!
http://sdm.link/slashd> > > > > > > ot
> > > > > > > _______________________________________________
> > > > > > > QuantLib-dev mailing list
> > > > > > >
[hidden email]
> > > > > > >
https://lists.sourceforge.net/lists/listinfo/quantlib-dev> > > > > > >
> > > > > >
> > > > > > ---------------------------------------------------------
> > > > > > ----
> > > > > > ----
> > > > > > -------------
> > > > > > Check out the vibrant tech community on one of the world's
> > > > > > most
> > > > > > engaging tech sites, SlashDot.org!
http://sdm.link/slashdot> > > > > > _______________________________________________
> > > > > > QuantLib-dev mailing list
> > > > > >
[hidden email]
> > > > > >
https://lists.sourceforge.net/lists/listinfo/quantlib-dev> > > > > >
> > > >
> >