the curve, the second is the lag used in the bond. They're different
> Ok, I have got one last question about CPIBond.
>
> In the test suite, we have 2 observation lag settings. One for building the
> inflation curve(observationLag) and one for building the
> bond(contractobservationLag). What do these two stand for?
>
> Thanks,
>
> Seyfullah.
>
> -----Original Message-----
> From: Raso Mirko (ICCREA Holding) [mailto:
[hidden email]]
> Sent: Friday, April 13, 2012 1:59 PM
> To: Luigi Ballabio; Seyfullah ÇETİN
> Cc:
[hidden email]
> Subject: Re: [Quantlib-users] CPIbond
>
> In the attached file, the "patch" ... or simply the official cpibond.cpp
> file (QL 1.2) plus the following line in the Class constructor:
>
> ...
> // added to use the standard bond functions
> calculateNotionalsFromCashflows();
> ...
>
>
> Hope it helps.
> Cheers,
>
> Mirko Raso
>
> -----Messaggio originale-----
> Da: Luigi Ballabio [mailto:
[hidden email]]
> Inviato: 13 April 2012 09:34
> A: Seyfullah ÇETİN
> Cc: Raso Mirko (ICCREA Holding);
[hidden email]
> Oggetto: Re: [Quantlib-users] CPIbond
>
> I think that's correct. Do you have a patch you can send?
>
> Thanks,
> Luigi
>
> 2012/4/13 Seyfullah ÇETİN <
[hidden email]>:
>> Hi Mirko,
>>
>> Investigating the code I found the same, too. I added
>> calculateNotionalsFromCashflows() to the CPIBond constructor. But I
>> was just not so sure if it was the right solution. But the clean price
>> seems to be generated correctly.
>>
>> -----Original Message-----
>> From: Raso Mirko (ICCREA Holding) [mailto:
[hidden email]]
>> Sent: Thursday, April 05, 2012 12:39 PM
>> To: Seyfullah ÇETİN
>> Cc:
[hidden email]
>> Subject: Re: [Quantlib-users] CPIbond
>>
>> Hi all,
>> I've got the same problem on using cleanprice() method for the
>> cpibond, while it disappers when the NPV() method is invoked, as done
>> in the test suite.
>> Problems arise even calling other methods such as, for example,
>> accruedamount(...), dirtyprice() or yield(...).
>>
>> Investigating the code the problem seems to be connected to the
>> missing generation of the notional schedule of the bond
>> (notionalSchedule_ and notionals_ property).
>> In fact, due to the its "inflation nature", the cpibond doesn't call
>> the
>> addRedemptionsToCashflows(...) method because redemption is managed
>> directly by the inflationCashFlow class and, consequently, no
>> notional schedule is build.
>>
>> An easy workaround (I tested and works fine) is adding a call to
>> calculateNotionalsFromCashflows() method in the class definition
>> which generates the required schedule but doesn't alter the bond
>> cashflows and, more important, the final price.
>>
>>
>> Let me know if I missed some other aspects in the global cpibond
>> management or if there's another more appropriate solution.
>>
>> Ciao,
>> Mirko
>>
>> -----Messaggio originale-----
>> Da: Seyfullah ÇETİN [mailto:
[hidden email]]
>> Inviato: 22 March 2012 09:15
>> A:
[hidden email]
>> Cc: 'Luigi Ballabio'
>> Oggetto: Re: [Quantlib-users] CPIbond
>>
>> Hi again,
>>
>> Here is the code. It is pretty much same as the the one in test suite.
>>
>> In the line when I try to get the cleanprice() (cpiB.cleanPrice();), I
>> get a "Vector iterator offset out of range" exception.
>>
>> -----Original Message-----
>> From: Luigi Ballabio [mailto:
[hidden email]]
>> Sent: Tuesday, March 20, 2012 3:40 PM
>> To: Seyfullah ÇETİN
>> Subject: Re: [Quantlib-users] CPIbond
>>
>> May you send to the mailing list some code that reproduces the problem?
>>
>>
>> 2012/3/20 Seyfullah ÇETİN <
[hidden email]>:
>>> We get a C++ vector exception. It is thrown when Bond::notional(Date
>>> d)
>> is
>>> called. It is because notionalSchedule_ is empty I guess.
>>>
>>>
>>>
>>> From: Luigi Ballabio [mailto:
[hidden email]]
>>> Sent: Tuesday, March 20, 2012 1:47 PM
>>> To: Seyfullah ÇETİN
>>> Cc:
[hidden email]
>>> Subject: Re: [Quantlib-users] CPIbond
>>>
>>>
>>>
>>> 2012/3/16 Seyfullah ÇETİN <
[hidden email]>
>>>
>>> I haven't seen many examples of CPIBond usage. There is only one in
>>> test suite which is used for CPI Swap constintency. I tried to use
>>> some parts
>> of
>>> that code chunk to create a CPIbond and access its methods. I can get
>>> some of them but for example, I can not access cleanprice(), it
>>> throws an exception. Is CPIbond a useable class or just still under
> construction?
>>>
>>>
>>> It should be usable. What is the message of the exception? Setting
>>> up the inflation curves might be tricky.
>>>
>>> Luigi
>>>
>>>
>>>
>>>
>>> --
>>> This message has been scanned for viruses and dangerous content by
>>> MailScanner, and is believed to be clean.
>>
>> --
>> This message has been scanned for viruses and dangerous content by
>> MailScanner, and is believed to be clean.
>>
>> AVVISO DI RISERVATEZZA
>>
>> Il testo e gli eventuali documenti trasmessi contengono informazioni
>> riservate al destinatario indicato.
>> La seguente e-mail è confidenziale e la sua riservatezza è tutelata
>> legalmente dalle normative vigenti.
>> La lettura, copia od altro uso non autorizzato o qualsiasi altra
>> azione derivante dalla conoscenza di queste informazioni sono
>> rigorosamente vietate. Se si ritiene di non essere il destinatario di
>> questa mail, o se si è ricevuto questa mail per errore, si prega di
>> darne immediata comunicazione al mittente e di provvedere immediatamente
> alla sua distruzione.
>>
>>
>> PRIVACY NOTICE
>>
>> The information contained in this transmittal, including any
>> attachments hereto, are confidential and privileged, and intended
>> solely for the specified addressee(s). This e-mail has a confidential
>> nature which is protected by the Italian law. Moreover, the
>> recipient(s) may not disclose, forward, or copy this e-mail or
>> attachments, or any portion thereof, or permit the use of this
>> information, by anyone not entitled to it, or in a way that may be
>> damaging to the sender. If you are not the intended addressee, or if
>> you receive this message by error, please notify the sender and delete
>> this information from your computer.
>>
>>
>> ----------------------------------------------------------------------
>> -------- For Developers, A Lot Can Happen In A Second.
>> Boundary is the first to Know...and Tell You.
>> Monitor Your Applications in Ultra-Fine Resolution. Try it FREE!
>>
http://p.sf.net/sfu/Boundary-d2dvs2>> _______________________________________________
>> QuantLib-users mailing list
>>
[hidden email]
>>
https://lists.sourceforge.net/lists/listinfo/quantlib-users>
> AVVISO DI RISERVATEZZA
>
> Il testo e gli eventuali documenti trasmessi contengono informazioni
> riservate al destinatario indicato.
> La seguente e-mail è confidenziale e la sua riservatezza è tutelata
> legalmente dalle normative vigenti.
> La lettura, copia od altro uso non autorizzato o qualsiasi altra azione
> derivante dalla conoscenza di queste informazioni sono rigorosamente
> vietate. Se si ritiene di non essere il destinatario di questa mail, o se si
> è ricevuto questa mail per errore, si prega di darne immediata comunicazione
> al mittente e di provvedere immediatamente alla sua distruzione.
>
>
> PRIVACY NOTICE
>
> The information contained in this transmittal, including any attachments
> hereto, are confidential and privileged, and intended solely for the
> specified addressee(s). This e-mail has a confidential nature which is
> protected by the Italian law. Moreover, the recipient(s) may not disclose,
> forward, or copy this e-mail or attachments, or any portion thereof, or
> permit the use of this information, by anyone not entitled to it, or in a
> way that may be damaging to the sender. If you are not the intended
> addressee, or if you receive this message by error, please notify the sender
> and delete this information from your computer.
>
>
> ------------------------------------------------------------------------------
> Better than sec? Nothing is better than sec when it comes to
> monitoring Big Data applications. Try Boundary one-second
> resolution app monitoring today. Free.
>
http://p.sf.net/sfu/Boundary-dev2dev> _______________________________________________
> QuantLib-users mailing list
>
[hidden email]
>
https://lists.sourceforge.net/lists/listinfo/quantlib-usersmonitoring Big Data applications. Try Boundary one-second
resolution app monitoring today. Free.